img

Gorilla Glue Dries White Pen

Product Code : GO-04  

$ 3.49

In stock Write a review

Gorilla Glue strength in a dries white formula, now in a Precision Pen. Perfect for applications that require a precise amount of glue, the flow-control design dispenses the right amount of glue, where you need it. Gorilla Glue offers superior strength, versatility and is 100% waterproof.
Dries White: 2x Faster*
100% Waterproof: won't break down with exposure to moisture
Precision Applicator
Versatile: Bonds wood, stone, metal, ceramic, foam, glass and more!
Incredibly Strong: Expands 3 times into the materials to form an incredibly strong bond
Clamp Time: 30-60 Minutes
*Dries 2X faster than Original Gorilla Glue
Directions:
Instructions: Gorilla glue is not an instant glue. All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. Gorilla Glue will stain skin and ruin clothes. Damp it! Gorilla glue is cured with moisture. Lightly dampen one surface with water. Glue it! Spread a thin layer of Gorilla glue on other surface. Clamp it: Clamp objects together for 30-60 minutes. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Note: Do not over apply glue. While curing, glue expand 3-4 times. Be careful of squeeze-out. Not recommended for use on polypropylene or polyethylene plastics. Clean-Up: Wipe wet glue off project immediately with dry cloth and/or paint thinner. Cured glue can be removed from work piece with chisel, scraper or sandpaper. See First Aid section for removal from skin. Storage: After each use, wipe nozzle clean with a dry cloth. Squeeze all air from bottle. While still squeezing, tightly replace lid. Min. Coverage: 1/2 oz. per sq. ft. Open Working Time: Up to 5-10 minutes. Clamp: 30-60 minutes above 40 degrees F. Best at room temperature. Cure Time: 80% in 1 hour. Allow bond to cure for 24 hours. Full cure dependent on temperature and humidity. Moisture Content: Best results from 10-25%. Below 10%, dampen surfaces with water.


GO-04